| GENERAL SPECIFICATIONS |
| PERS-2400B | |
|---|---|
| RADIO | |
| Transmitter Capacity: | 16 DX or DXS devices |
| Operating Frequency: | 315 MHz |
| RF Format: | Linear DX, DXS |
| Receiver Type: | diversity, dual superheterodyne |
| RF Programming Method: | Linear quick-learn |
| COMMUNICATIONS | |
| Communicator Formats: | Contact ID and 4 x 2 |
| Dialing Method: | pulse or tone dialing formats, field enabled |
| Communicator Reports: | All transmiter alarms; all transmitter trouble - supervisory, low battery; all inactivity alarm reports; AC power failure; AC power restored; console low battery; console emergency alarm |
| CONSOLE | |
| Controls: | EMERGENCY: large round button with multiple actuation points, Braille characters; CLEAR: momentary for system reset, call cancellation; HOME: momentary to reset timer or press and hold for 3 seconds to disable the function; POWER SWITCH: controls 120 VAC source, as well as the backup battery |
| Indicators: | four LEDs (POWER ON, TROUBLE, SENDING, HOME) |
| Inputs: | In and out telephone jacks |
| Outputs: | one form "C" relay output activated upon initiation of any alarm condition |
| Programming Method: | via RA-2400 remote access software |
| Inactivity Timer: | software programmable for 8, 12, or 24 hour cycles |
| Silent Alarm Feature: | software programable per channel |
| Delayed Alarm Feature: | software programmable per channel; delay time 15 or 30 minutes; note that an alarm will not be transmitted if alarming transmitter sends a restore signal to the console prior to delay timer timeout |
| Selectable Two-Way Voice Activation: | software programmable per channel |
| Speakerphone Option: | software programmable; call duration time selectable for 15 or 30 minutes |
| Pulse/Tone Dialing: | software or console programmable |
| Audible Output: | integral siren |
| Output Tones: | distinct alarm tones provided for emergency and fire alarm conditions; provisions for timer reset tone also incorporated into system |
| Backup Battery: | recommended battery is 12V, 1.2 amp-hour; Linear part number 100104 |
| Backup Period: | 32 hours minimum with VB-4 voice board installed in the unit |
| Listing: | UL per Standard 1637, Home Healthcare Signaling Equipment |
| Dimensions: | 7.5" W x 8.75" H x 3" D |
Specifications subject to change without notice.