|
Access Control Locksets
|
||||||
Cylindrical This lockset easily retrofits into an ANSI 151.8 prepped door and requires only one additional 1” hole for installation. • Lock Body: Grade 1 Cylindrical Lockset w/ clutch mechanism • Latch: 9/16” Throw, Stainless Steel Latch Retractor • Cylinder: Solid Brass Schlage “C” keyway, 6 pin, with (2) nickel silver keys • Optional Cylinders: I/C Core Prep Lever to accept OEM cylinders (see configuration guide for details) |
Exit Allows the LS Series locksets to be installed in door applications requiring emergency egress exit bar. Easily installs requiring only (2) additional through holes. Exit bar supplied by others. • Lock Body: Grade 1 Mortise Lock body • Latch: Stainless Steel Latchbolt with 3/4” projection and deadlocking latch • Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin mortise cylinder, with (2) nickel silver keys. 1 1/8” and 2” can be used with optional spacers • Requires Exit Device Mounting Kit: see configuration guide for details • Also compatible with Rim panic devices, surface horizontal rod devices. Contact factory for installation instructions for these applications • Cylinder Options: Standard Schlage C cylinder or "LC" less core (no cylinder provided) |
Mortise This lockset retrofits most ANSI 115.1 Mortise prepped doors with the additional of (2) through holes. The LS Series Mortise lockset can be easily installed in a door with an existing mortise lock. • Lock Body: Grade 1 Mortise Lock body • Latch: Stainless Steel Latchbolt with 3/4” projection and deadlocking latch • Handing: Field reversible, left or right hand • Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin mortise cylinder, with (2) nickel silver keys. 1 1/8” and 2” can be used with optional spacers • Cylinder Options: Standard Schlage C cylinder or "LC" less core (no cylinder provided) |
Deadbolt This lockset retrofits most ANSI 115.1 Mortise with Deadbolt prepped doors with the additional of (2) through holes. The LS Series Deadbolt lockset can be easily installed in a door with an existing mortise and deadbolt lock. • Lock Body: Grade 1 Mortise Lock body with Deadbolt • Latch: Stainless Steel Deadbolt with 1” projection, latchbolt with 1 3/4” projection and deadlocking latch. Deadbolt may be projected from option 1 3/4” mortise cylinder with cover cam or thumb turn from inside door • Privacy Setting feature available • Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin mortise cylinder, with (2) nickel silver keys. To project deadbolt from outside door requires a 1 3/4” mortise cylinder. 1 1/8” and 2” can be used with optional spacers and a straight cam • Cylinder Options: Standard Schlage C cylinder or "LC" less core (no cylinder provided) |
The standard cylinder is a solid brass Schlage "C" keyway installed in the lockset body or handle.
For field installation of commonly available OEM lock cylinders, Cylindrical locksets can be ordered with an I/C core prep lever (lockset lever machined to accept a specific OEM cylinder, no cylinder is included in the lockset lever).
Mortise, Exit, and Deadbolt locksets can only be ordered with the standard Schlage “C” keyway or with no cylinder in the lockset body.
Installation Manual
Programming Manual
General
• Backset: 2 3/4” Standard
• Strike: 4 7/8” ASA Strike
• Door Thickness: 1 5/8” to 1 7/8”
• Handing: Field reversible, left or right hand
Compliance
• ANSI 156.2, Series 4000 Grade 1
• Federal Handicap and ANSI A117.1 Accessibility Code
• Federal FF-H-106C
• California: (Formerly Title 19, State Fire Marshall)
Environmental
• Electronics sealed in conformal coating process
• Through door wire raceway reduces wire exposure to moisture
• Neoprene gasket seals exterior housing
• -20F to 120F, up to 98% humidity (non-condensing)
Electrical
• Power: 4 AA alkaline batteries
• Cycles: Up to 150,000
