2100A: 12-volt In-wall IR Interface
Installation Manual
Large Image
The Model 2100A 12-volt In-wall IR Interface is used with the 12 volt DA-550BID and DA-550HHR distribution panels to allow IR control from any room on the system. The 2100A is bi-directional and can input as well as output IR information. The Model 2100A will accept any 12 volt target using the input jack or three wire screw terminal. Hint: when using a 12 volt IR system and 2100A's are not at all locations a DC block, Model 2501, must be used on the coax.
Features
- In-wall interface
- RF output
- One IR target port
- One IR emitter port
- 12 volt IR systems only
- Decora® style wall plate
- 1.3" W x 4.0" H x 2.2" D
Specifications subject to change without notice
|
